www.maxxair.com 1.800.780.9893
• Select Fan Intake or Exhaust.
• 4 fan speeds to choose from.
• Select Automatic or Manual control of fan.
Electric lifting vent opens and closes with
the touch of a button.
•
Built-in thermostat. Always displays room
temperature in Fahrenheit or Celsius.
•
Fan Speed Button; changes fan motor speeds. Selects speeds 1, 2, 3, or 4 when pressed.
When button is pressed, a dash line will appear on the screen below the selected speed. Keep
pressing this button until the desired speed is indicated.
AIR
IN/OUT
VENT
OPN/CLS
FAN
FAN
SPEED
Fahrenheit to Celsius view. Press and Hold both buttons for 7 seconds to change from
Fahrenheit or Celsius.
Temperature set point control. When a set temperature button is pressed once, the display will
light. When pressed again, the room temperature is replaced with a flashing set point
temperature. When either button is pressed a third time, the set temperature will change
accordingly. Display automatically returns to room temperature after 7 seconds of inactivity.
Air Direction Key (In/Out); Changes fan motor direction when pressed.
Note: Models 5501 and 6601 are exhaust only. This keypad button is blanked out
and not functional.
Vent Position Key; Opens and Closes the MaxxFan roof vent lid. Allows user to open and
vent hot air out of the vehicle with the fan motor “on” or “off”. Will automatically shut off the fan
motor when this button is selected “CLOSED” and the fan is in the “ON” mode.
NOTE: This button will not close the vent lid when the “FAN MODE” is selected to the “AUTO”
position. The word “AUTO” will flash for 5 seconds to remind the user that the fan must be in
“ON” mode to close the vent lid.
FAN MODE Off / On / Auto Button
The Off position
turns the fan motor off. The Vent Position Button remains operable.
The On position
turns on the fan motor to any selected speed. If vent lid is closed the vent lid
will automatically open.
Auto mode
allows the thermostat to turn the fan on and off depending on the thermostat set
point. If the set point is lower than the room temp, the fan will run. If the set point is higher than
room temperature the fan will not run. If the vent lid is closed and the thermostat set point is set
below room temperature, auto mode will automatically open the vent lid and turn the fan on to
the pre-selected speed.
SET TEMP
Rev.112305
UP DOWN
OFF/ON/AUTO
Model Series 5500 and 6600
Shown Actual Size
Backlit screen makes it easy to read. Press
any key and screen lights for 7 seconds.
•
Thermostat setting can be selected to open
vent and turn fan on and off as desired
temperature is achieved.
•
Note: Press keys firmly and hold momentarily
until a change in setting is observed
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals